Rational Combi Master, Training Manual

Page: 98 / 200

98
SCC
Edition 10-2008a
Flash SCC Software
USB stick MUST be formatted in FAT (FAT16) format.
NOTE: Only use the standard USB Flash stick for SCC Flash update!
This RATIONAL con gured USB Flash memory stick can be ordered under
part number: 87.00.010
Software can only be updated to the next higher version. Flashing software versions prior to the exist-
ing version is NOT possible!
The actual software version can be downloaded from:
www/rational-ag.de/service/technical_documentation/SCC-Line/Software
Additionally the software on the USB stick can be automatically updated using the „update.exe“ le on
the memory stick.
Note: A valid internet connection must be available on your computer.
NOTE!
Software update on a unit with unknown software version (in case a pcb from spare part stock
is used) or in case the external EEPROM was faulty please observe the
procedure on the following page.
The software can be updated by the customer using two different ways:
Connect the USB stick to the usb interface at the bottom left hand cor-
ner of the control panel
Press function and USB key
The update icon will show when a USB stick with software is connected
In window 4 the Software version of the USB stick is displayed.
Touch Update-key once starts the update process, “UPDATE” is shown
on the displays.
“ON- Please wait” Is shown;
Disconnect the USB Stick only after the 9 main cooking icons are dis-
played.
For Standard Software Update please proceed as follows:
1.
Switch unit on
2. Wait until the operator mode of the SelfCooking Center is displayed.
3. Connect the USB stick with the actual software version to the USB interface of the
Rational SelfCooking Center.
4. Switch unit off and on again.
The unit will display „UPDATE“ followed by „Please don‘t touch“.
After the operator mode of the SelfCooking Center is displayed the USB stick can be
removed from the unit.
Please make sure your customer has always the latest software on his unit.
Please make sure you have the latest update.exe dated December, 6th, 2004
(12.06.2004) on your USB memory stick.
update
SCC 03_01_03
update