13
S P E C I F I C A T I O N S
IEC 61851 Mode 3
IEC 62196 Type 1 and type 2
single-phase or 3 phase, 230V-400V, 16 A and 32A
3.7kW, 7.4kW, 11kW, 22kW
400mm x 250mm x 105mm
PC/ABS
4 kg (incl. cable)
IP54, rain-tight
-25°C to +40°C
Charging System
Cable version car connector
Power input
Power output
Dimensions
Housing
Weight
Environment Operating
Temperature
Marking
M A I N T E N A N C E
The Home Box requires no maintenance other than occasional cleaning.
Warning
: Switch off your Home Box before cleaning the unit.
Warning
To reduce the risk of electrical shock or equipment damage,
be cautious while cleaning the connectors and case.
Clean the Home Box using a soft cloth lightly moistened with mild detergent
solution. Never use any type of abrasive pad, scouring powder, or flammable
solvents such as alcohol or benzene.
HOME BOX PLUS / Version: EV045
IEC 62196 Type 2 Outlet
Outlet version
IEC 62196 Type 2 Outlet
Outlet version
By pressing the middle button, you can see the meter readings of the last 5
sessions.
The values can be deleted by pressing the left
and right arrow buttons at the same time.
With the middle button you can go back to the
previous screen.
CHARGER ERROR
In case of the charger error, you will see the
error screen with the error code. If multiple
errors occur the codes will alternate.
By error massage please contact Ratio Electric
for support.
Et (1):
kWh
Et (2):
kWh
Et (3):
kWh
Et (4):
kWh
Et (5):
kWh
CHARGER
NOT READY
ERRCODE: …….
12
6
7.
Connect in-coming power to the left
terminal block.
Single Phase :
L1=Brown
N= Blue
Earth= Green/Yellow
3 Phase
L1=Brown
L2=Black
L3=Grey
N=Blue
Earth=Green/Yellow
8.
Close bottom cover and carefully slide metallized cover over the Charge Station.
IMPORTANT:
OUTLET VERSION - before closing outlet cover,
be sure the outlet is unlocked!
