33
Deco Stop for RATIO iX3M Tech+ & iX3M Reb
To navigate the menu follow the instructions in the picture on the left.
The whole dive profile is divided in 3 depth zones.
First Zone: from the surface to depth DEPTH1.
Second Zone: from DEPTH1 to DEPTH 2.
Third Zone: from DEPTH2 to the maximum depth reached during the dive
For every depth zone it is possible to specify which decompression step to use to
calculate the different stops in that zone by the parametres STEP1, STEP2, STEP3.
example:
<-- see the settings in this picture
With this settings, for depths below 48mt the stops will be spaced out of 5 mt
between them; the stops included between 48 mt and 15 mt will be spaced out of
3 mt while the stops between 15 mt and the surface will be spaced out of 3 mt.
Do you know what?:
To force the last stop to a preset depth (eg. 6mt) you can set STEP1=6mt and
DEPTH1=6mt
Do you know what?:
You can keep pressed the buttons C or D to change the iX3M data more rapidly.
STEP parametres can be modified with step of 1.0mt.
DEPTH parametres can be modified with step of 1.0mt.
Do you know what?:
If you have any doubts on your device’s setting, you can set the company’s parametres from the menu DEFAULT
DECO STOP
STEP 1:
DEPTH 1:
STEP 2:
DEPTH 2:
STEP 3:
b
A
C
D
ExIT
NExT
ENTRY
+
_
3.0
15.0
3.0
48.0
5.0
For iX3M Tech+ iX3M Reb
