background image

32

DIVE SET 2

S. STOP TIME: 

It sets the Safety Stop’s time in minutes.

You can set the time from 0 to 9  minutes (if 0 the Safety Stop is omitted)

Do you know what?: 

The different diving agencies can recommend different times for the Safety Stop. 
Ask your Instructor or your diving diving certification agency for the value they suggest.

S. STOP DEPTH: 

It sets the Safety Stop’s depth.

You can set the Safety Stop’s depth between 3 and 9 metres.

The Safety Stop is carried out one meter deeper, than the depth you have set .
(eg. if S.STOP DEPTH= 5 the stop is carried out from 5.9 metres)

The Safety Stop is recommended only for dives deeper than 9 metres.
The timer is re-set if the depth of 9 metres is passed again.

Do you know what?:

If in the dives with deco, a deco stop is set between 10 and 1 mt, the Safety Stop is automatically omitted.

DEEP STOP: 

It selects if use the Deep Stops and which algorithm is to be used to 

calculate the DEEP STOPS:

  OFF: 

No Deep Stop

  STD: 

Standard Method (half of the max. depth for 2,5 minutes)

  PYLE:

 Pyle Method (ask your instructor for the Pyle Method)

LAST STOP:

 (1-10): The depth at which you want to carry out the last decompression 

stop (if the dive is outside NDLs and requires decompression stops)

DIVE SETTINgS

S.STOP TIME:

S.STOP DEPTH:

DEEP STOP:

LAST STOP:

b

A

C

D

ExIT

NExT 

ENTRY

+

_

3

5

OFF

3

Summary of Contents for iX3M Easy







































































Reviews: