Ratek SWB10D Water Bath - Operating Manual
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 9 of 24
The use of flammable liquids may cause serious injury or danger to life.
CAUTION
CAUTION
CAUTION
CAUTION
Always work above the level of the water bath to avoid spillage of dangerously hot water. At no point
should the user, operator, animal or any other perishable object be situated directly beneath the water
bath.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS wear protective eyewear when working with hot liquids.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS place the water bath on a strong, even, dry, flat waterproof surface which is made of
inflammable material. Placing the water bath on an unstable surface could cause hot water to spill.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS empty the water bath before moving the equipment to a new location.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS turn off both mains power switches (elements 6 and 8 in Figure 1) when the unit is not in
operation and turn off the mains power supply at the outlet.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS turn off both mains power switches (elements 6 and 8 in Figure 1) and unplug the
equipment from the mains power supply outlet before emptying the water tank or moving the
equipment.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS be careful of water condensation above or near the water bath and ensure at all times
that the condensation cannot come in contact with the water bath control panel or mains power
input receptacle (element 10 in Figure 1). Ensure benches are kept dry at all times.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS operate the water bath in a well ventilated area with adequate clearance around the water
bath as indicated.
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS be careful of steam and avoid making contact.
-
ALWAYS use the water bath with the oscillating cradle moving t
ALWAYS use the water bath with the oscillating cradle moving t
ALWAYS use the water bath with the oscillating cradle moving t
ALWAYS use the water bath with the oscillating cradle moving to improve temperature uniformity
o improve temperature uniformity
o improve temperature uniformity
o improve temperature uniformity....
-
ALWAYS
ALWAYS
ALWAYS
ALWAYS use only the supplied mains power lead. Non-genuine leads may not be suitable.
-
NEVER operate the water bath without water in the water tank.
NEVER operate the water bath without water in the water tank.
NEVER operate the water bath without water in the water tank.
NEVER operate the water bath without water in the water tank.
-
NEVER
NEVER
NEVER
NEVER empty the water bath while it contains hot water. Always allow the water to cool to ambient
room temperature before emptying.
-
NEVER
NEVER
NEVER
NEVER operate the equipment if you believe it is damaged in any way.
-
NEVER
NEVER
NEVER
NEVER operate the water bath if the mains power supply cable is damaged in any way
-
NEVER
NEVER
NEVER
NEVER use any sharp or metal objects near the water bath control panel or mains power input
receptacle (element 10 in Figure 1).
-
NEVER
NEVER
NEVER
NEVER lift the water bath if you have an existing injury that impairs your ability to lift.
Preparation & Installation
Preparation & Installation
Preparation & Installation
Preparation & Installation
The water bath should be installed and operated in strict accordance with the following instructions.
CAUTION
CAUTION
CAUTION
CAUTION
The water bath is not for use in explosive atmospheres as there is a risk of fire, explosion, burns or
scalding present under these conditions.
CAUTION
CAUTION
CAUTION
CAUTION
Be careful when lifting and observe your local operational health and safety requirements for lifting
before unpacking the carton.
Unpacking and Installing
Unpacking and Installing
Unpacking and Installing
Unpacking and Installing
-
Carefully remove all packaging material from the water bath, as well as the supplied mains power
lead, User Manual and any other supplied accessories. The oscillating cradle (element 9 in Figure 1)
inside the water bath should not be removed
should not be removed
should not be removed
should not be removed....
-
Carefully inspect the water bath, mains power lead and all packaging for any signs of damage. If any
signs of damage are present, do not
do not
do not
do not install or operate the equipment. Contact the supplier of your
equipment if you have a received a damaged product.
-
Place the water bath in an upright position as per Figure 1 on a strong, even, flat waterproof surface
which is made of inflammable material.