Ratek OM8 Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 13 of 15
Technical Specifications
Power requirements
240v AC / 80 watts
Motor
Brushless AC
Mixer Control
Microprocessor control with digital tachometer
Speed Range
40 to 400 RPM Variable through an orbit diameter of 25mm
Timer Range
0-99 minutes or 0-99 hours with 3 presets
Platform
700 x 530mm with Nitrile mat. Counterbalanced and supported by 11 ball races.
Capacity
Maximum 15kgs (Heavier loads will restrict the maximum speed)
“Note: Capacities greater than 15kgs are possible on custom-counterweighted models
Safety features
Motion interrupt cut out
Replaceable Fuse Type
F250V/2AL,
M205 miniature glass type
Overall Dimensions (mm)
L760xW650xH235
Nett Weight
40Kg
Environmental Conditions
Suitable for use according to IEC 61010-1 standard as follows :
-
Indoor use
-
Altitude up to 2,000 Metres
-
Temperature 0° Celsius to 45° Celsius
-
Maximum relative humidity 80 % for temperatures up to 31° Celsius decreasing linearly to 50
% relative humidity at 40° Celsius
-
MAINS supply voltage fluctuations up to ±10 % of the nominal voltage
Over-voltage Category – II
Pollution Degree – 2
Disposal
At end of life, this equipment should be disposed of in an environmentally friendly way. This equipment cannot be disposed of with other general
waste, but instead taken to your local or regional waste collection facility for recycling and/or suitable treatment procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household
waste disposal service or your nearest commercial recycling centre.
EMC Conformity
AS/NZS CISPR 14.1:2010 Electromagnetic compatibility - Requirements for household appliances, electric
tools and similar apparatus – Emission. This forms the basis of compliance to the requirements of the
Electromagnetic Compatibility Framework (‘C TICK’).
