Ratek OM8 Orbital Shaker – User Manual
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 6 of 15
Safety Labels And Markings
The equipment is provided with safety caution labels. An explanation of each caution label is provided below. It is the responsibility of the
operator and user to fully understand the meaning of these warning labels prior to operating the equipment.
Caution Labels
Definition
Colours:
Black on a yellow background
The Orbital Shaker is powered by an alternating current power supply sufficient to cause
harm if contact with the electrical supply is made. Under no circumstances should any
part of the equipment be opened, un-screwed, loosened or disassembled whilst power is
applied to the unit. Only authorized service agents are permitted to remove covers.
This label is fitted by the manufacturer and must not be removed under any
circumstances.
Colours:
Black on a yellow background
The Orbital Shaker has a rotating platform which should not be touched whilst it is
moving. Keep all body parts away from the moving platform whilst in operation. Always
stop the platform using the front panel speed control before adding or removing any
items.
This label is fitted by the manufacturer and must not be removed under any
circumstances.
Operating Procedures
You must take the time to familiarize yourself completely with the following operating procedures before installing or operating the Orbital Shaker in
order to achieve the best performance and maximum attainable user safety.
Identification of Controls & Functions
Throughout this User Manual, the numerical element representing a control or component of the Orbital Shaker will be used to identify it. The figure
below indicates all key controls and components of the Orbital Shaker with their corresponding numerical element labeled.
Figure 1
Numerical Element & Description of Component
1
Power switch
2
Platform
3
Time Control
4
Speed Control
5
User Presets
6
Power Lead
7
Platform Retaining Screws
8
Counterweight (Under Platform)
