12
EN
13. BLADE SHARPENING
After many hours of a continuative use of the battery
scissors or if they are not able to cut anymore, it is
necessary to sharp the blade. To carry out this operation,
start the blade and press sharpening button “1” for 3-4
seconds (as shown in picture 7). Repeat this operation
2-3 times.
If the sharpening process should be ineffective, check
the wear of the emery grinding wheel “2” (see picture
7). If wheel “2” is too worn or dirty, replace it by removing
the blade by means of the proper tool.
1
7
14. LUBRICATION
Every 3-4 working days, it is necessary to lubricate the
gear pair. In order to carry out this operation, remove
protective plug “A” located on the head of the battery
scissors and fill it with the grease supplied. Screw plug
“A” again a few turns. Screw plug “A” a few turns every
day (see picture 8).
The blade must never be dirty with grease or oil.
8
WARNING
A
2
