10
EN
A
11. USE
3
To use the battery scissors manually, proceed as follows:
1) Release the battery (if it is charged) from the
charger as described at paragraph 12;
2) Connect the battery to the motor and fix it
following the slots on the battery;
3) Lay the material to be cut on a table;
4) Put the material on the cutting foot (see picture
3);
5) Press the button under the handle to start the
scissors;
6) Push the battery scissors in the desired direction, being careful to keep the material in
front of them as stretched as possible and preventing it from curling in the front part
of the scissors.
NOTE
The thrust on the battery scissors must be as uniform
as possible. To carry out linear cuts with precision (and
to follow predetermined paths), we also recommend
using the arrow point (see point “A” in picture 4).
4
