16
Function introduction for combination buttons
Child lock function
Press "▲" and " " simultaneously to turn on or turn o
f
f child lock function. When
child lock function is on, " " icon is displayed on remote controlle
r
. If you operate
the remote controlle
r
, the " " icon will blink three times without sending signal to
the unit.
▲
Temperature display switchover function
Under OFF status, press " " and "MODE" buttons simultaneously to switch temp-
erature display between
℃
and .
▲
Note:
● Under 8
℃
heating function, fan speed i
s
defaulted at auto speed and it can’t be
adjusted.
● Under 8
℃
heating function, set temperature can’t be adjusted. Press
"
TURBO
"
button and the remote controller won’t
s
end signal.
● Sleep function and 8
℃
heating function can’t operate at the same time. If 8
℃
● Under temperature display, the remote controller will display 46 heating.
8
℃
heating function
（
Not applicable
）
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start
up or turn o
f
f 8
℃
heating function. When this function is started up, " " and "8
℃
"
will be shown on remote controlle
r
, and the air conditioner keep the heating status
at 8
℃
. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
℃
heating function.
● Under energy-saving function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
● Sleep function and energy-saving function can’t operate at the same time. If
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.
heating function has been set under heating mode, press sleep button will cancel
8
℃
heating function. If sleep function has been set under heating mode, start up
the 8
℃
heating function will cancel sl
e
ep function.
