Raritan MasterConsole MX48, Installation And Operation Manual

Page: 35 / 62

A
PPENDIX
B: MX4 F
RONT
P
ANEL
C
ONTROLS
25
Appendix B: MX4 Front Panel Controls
The front panel of the MX
4
consists of an LCD and 7 buttons (Figure 25 and Figure 26). The front panel controls
provide special systems management and technical support functions. Normally there is no need to use the front
panel beyond viewing status. Typically, the front panel is used for the following tasks:
Figure 25 MX
4
Front Panel
1. Confirming power on
2. Programming an MX
4
unit for second-tier operation
3. Changing video-sync signal type for certain monitors
Figure 26 MX
4
Front Panel Buttons
Front Panel Components and Functions
•
The LCD (A) shows the status of the system and indicates the functions that can be selected by pressing the
front panel control buttons.
•
The ESC button (B) is used for canceling the displayed function and returning the system to the normal
state.
•
The FUNC button (C) is used to select the various functions.
•
The
Ç
,
È
,
Å
and
Æ
buttons (D), (E), (F) and (G) are used for selecting or setting various options
depending on the function being performed.
•
The ENT button (H) is used for confirming and executing the selected function.
Start-Up Display
When the MX
4
is turned on, it performs a start-up test. It checks each channel and user port to detect connections. If
an error is detected, it displays “ERROR!” and stops the process.
•
Press ENT to continue checking the remaining channels and ports.
•
Recycle the power by turning the MX
4
off and on to clear the error conditions.
•
If error persists, power down all computers and devices and then recycle the power again.
•
If error condition still persists, contact Raritan Technical Support for further assistance.