Raritan MasterConsole MX48, Installation And Operation Manual

Page: 25 / 62

C
HAPTER
4: I
NSTALLING
MX4 15
Chapter 4: Installing MX4
Installation Configurations
MasterConsole MX
4
can be installed to control 8, 16, or 32 computers in a one-tier installation with 4 simultaneous
users. To expand computer capacity, the MX
4
can be cascaded with other MasterConsole units to create a two-tier
installation that controls up to 256 computers.
Figure 16 One-Tier Configuration
One-Tier Installation
In a one-tier installation, only computers are connected to a single MX
4
unit (Figure 16). Complete the following
steps for a one-tier installation:
1. Shut down and power off all computers to be connected to the MX
4
.
2. Install a user console to the MX
4
.
•
Plug the 25-pin connector of a user console cable (CCPnnF) into one of the four user ports on the MX
4
back panel (Figure 17 and Figure 18).
•
Plug a user console (keyboard, monitor, and mouse) into the connectors at the other end of the user cable.
3. Power on the MX
4
unit.
•
The MX
4
will go through the start-up test. (See Start-Up Display)
•
The Login Menu will be displayed on the monitor.
•
Enter usera in the user name field of the Login Menu, and press <Enter>. The Selection Menu will be
displayed.
Figure 17 One-Tier Installation Cabling Details