Raritan Dominion SX16, Installation And Operation Manual, Page: 115 / 162

A
PPENDIX
F: RSA ACE/S
ERVER
C
ONFIGURATION
101
Appendix F: RSA ACE/Server Configuration
This section provides guidelines for configuring the RSA ACE/Server 5.0 so that SecureID can be used as the
authentication mechanism. Users in an ACE server native database can log on to Dominion SX units installed in the
network using SecureID token authentication.
It is assumed that RSA ACE/Server is running RADIUS services and able to authenticate users from its native
database. This guide does not provide initial configuration procedures for the ACE server but assumes that the
administrator is familiar with the ACE server and has the ability to set up and configure the application. Guidelines
are provided to allow SecureID to be used with the Dominion SX units.
These steps must be performed on the RADIUS server in order to use SecureID:
1. Configure all the units (define them in the RADIUS server database)
2. Establish
profiles
3. Configure users and associate profiles to each
Please follow the steps below:
1. Select Start
→
Programs
→
RSA ACE Server
→
Database Administration-Host Mode .
Figure 97 Launching RSA Administration Application
2. Select Agent Host
→
Add Agent Host from the main menu to launch the configuration menu.
Figure 98 Add Agent Host Selection