Appendix G: LDAP Configuration Illustration
254
Note: If the Dominion PX clock and the LDAP server clock are out of sync,
the certificates are considered expired and users are unable to
authenticate using LDAP. To ensure proper synchronization,
administrators should configure the Dominion PX and the LDAP server to
use the same NTP server.
Step D. Configure User Groups on the Dominion PX Device
A user group on the Dominion PX device determines the system and outlet
permissions. You must create the user groups identical to those created
for the Dominion PX on the AD server or authorization will fail. Therefore,
we will create the user groups
PX_User
and
PX_Admin
on the PDU.
In this illustration, we assume:
The PX_User group members can neither configure the Dominion PX
nor access the outlets.
The PX_Admin group members have the Administrator permissions
so they can both configure the Dominion PX and access the outlets.
To create the same user groups on the Dominion PX device:
1. Choose User Management > Users & Groups. The User/Group
Management page opens. This window is divided into a User
Management panel and a Group Management panel.
2. In the Group Management panel, type
PX_User
in the New Group
Name field.
3. Click Create. The PX_User group is created.
4. Repeat Steps 2 to 3 for creating the PX_Admin group.
To set the system permissions for each group:
1. Choose User Management > User/Group System Permissions. The
User/Group System Permissions page opens.
