QUICK START GUIDE
en-23
DIESEL PARTICULATE FILTER (DPF)
When the Regen Request light flashes, press
Button 4
then
Button 1
on the display to start
the Parked Regen cycle. To prevent damage
to the turf during Parked Regen, park the
mower on concrete or gravel.
The engine must be warm (above 65° C /
149° F), the Traction Pedal in the
NEUTRAL position, the Cutter Switch
(PTO) in the OFF position, the Park
Brake engaged, and the throttle in the
idle position for the Parked Regen cycle
to start. Do not stop the engine, dis-
engage the Park Brake or operate the
Traction Pedal until the Parked Regen
cycle is completed and the Regen
Request light turns off.
To inhibit the engine from performing a
Regen cycle, press
Button 4
then
Button 2
.
Refer to the full Safety, Operation and
Maintenance manual for more details on
the DPF regeneration system and levels.
SLOPE ANGLE DISPLAY
During work, if the machine is driven on a
slope of 14° the machine angle will be
displayed in the centre of the screen, until
the machine has been driven onto an area of
less than 14°.
GENERAL NOTES FOR
WARNING SCREENS
The number in the bottom right of the screen
indicates the total number of faults recorded.
Press the button below the
to confirm
the fault.
02:01
3.4 Hours
®
14
TM
1234
123.4 Hours
P
VISUAL DISPLAY
