QUICK START GUIDE
en-19
FLAIL \ CYLINDER MODE
The
MT503
cutting system is capable of
providing power to both Magna 250 Cutting
cylinders and MT Series flail units. To ensure
that these run at their intended speed it is
important to ensure the machine’s cutting
system is configured correctly.
The cutting system mode can be selected
via the display as follows:
1. Press
Button 4
twice to enter the
Main Menu
2. Use
Button 3
to scroll to
Settings
followed by
Button 4
to enter the
Settings Menu
3. Use
Button 3
to scroll to
PIN
fol
-
lowed by
Button 4
to enter the
Enter
PIN
page
4. Enter the Owner PIN (default 1001)
to enter the
PIN Menu
page
5. Use
Button 3
to scroll to
Flail \
Cylinder Mode
followed by
Button
4 to enter the
Flail \ Cylinder Mode
settings screen
6. Use
Button 2 & 3
to select the
required mode as appropriate
followed by
Button 4
to set
7.
Button 1
is then used to exit to the
Main Menu
or
Home Screen
Flail \ Cylinder Mode
Flail
Cylinder
LIFT ON REVERSE
The cutting units will automatically lift to the
Cross Cut position while mowing and the
vehicle is moved in reverse. Lift On Reverse
can be disabled via the display as follows:
1. Press
Button 4
twice to enter the
Main Menu
2. Use
Button 3
to scroll to Settings
followed by
Button 4
to enter the
Settings Menu
3. Use
Button 3 to
scroll to
PIN
followed by
Button 4
to enter the
Enter PIN
page
4. Enter the
Owner PIN
(default 1001)
to enter the
PIN Menu
page
5. Use
Button 3
to scroll to Lift On
Reverse followed by
Button 4
to
enter the
Lift On Reverse
settings
screen
6. Use
Button 2 & 3
to select either
Enabled
or
Disabled
as necessary,
followed by
Button 4
to set
Button 1
is then used to exit to the Main Menu
or Home Screen
Lift On Reverse
Disabled
Enabled
VISUAL DISPLAY
