QUICK START GUIDE
en-17
VISUAL DISPLAY
•
Use the Forward/Reverse pedal to
select the desired forward speed.
•
Press and release the Cruise Control
switch
When the Cruise Control icon appears on
the screen, remove foot from the Forward/
Reverse pedal.
Once cruise is engaged the forward speed
can be increased or decreased using the +
or – buttons on the display.
DISABLING CRUISE CONTROL
Cruise can be disabled via the display as
follows:
1. Press
Button 4
twice to enter the Main
Menu.
2. Use
Button 3
to scroll to Settings
followed by
Button 4
to enter the Settings
Menu
3. Use
Button 3
to scroll to PIN followed by
Button 4
to enter the Enter PIN page
4. Enter the Owner PIN (default 1001) to
enter the PIN Menu page.
5. Use
Button 3
to scroll to Cruise Control
followed by to enter the Cruise Control
settings screen.
6. Use
Button 2 & 3
to select either
Enabled or Disabled as necessary, followed
by
Button 4
to set.
7.
Button 1
is then used to exit to the Main
Menu or Home Screen.
ADAPTICUT™
AdaptiCut™ is a load sensing system that
maintains optimum cutting performance by
adjusting ground speed depending on the
machine cutting system loading. It will
automatically activate when the vehicle
transmission is set to Automatic (
A
), the
speed is set to Mow (Cutter Switch is on),
Cruise is active, and the cutting system
detects increased load. When active the
AdaptiCut™ icon will be displayed on the
screen and the green Cutting Unit Position
Lamps on the Armrest Pod will turn red.
The rate at which the vehicle speed is
reduced or increased in relation to cutter
system loading can be adjusted via the
display as follows:
1. Press
Button 4
twice to enter the Main
Menu.
2. Use
Button 3
to scroll to Settings
followed by
Button 4
to enter the Settings
Menu.
Cruise Control
Disabled
Enabled
TM
1234
123.4 Hours
P
MODE
A
