QUICK START GUIDE
en-18
VISUAL DISPLAY
VEHICLE SPEED
The vehicle forward and reverse
transmission speeds are factory set to the
defaults stated in this manual however can
be adjusted via the display as follows:
1. Press
Button 4
twice to enter the
Main Menu
2. Use
Button 3
to scroll to
Settings
followed by
Button 4
to enter the
Settings Menu
3. Use
Button 3
to scroll to PIN
followed by Button 4 to enter the
Enter PIN
page
4. Enter the
Owner PIN
(default 1001)
to enter the
PIN Menu
page
5. Use
Button 3
to scroll to
Vehicle
Speed
followed by
Button 4
to enter
the
Vehicle Speed
settings screen
6. Use
Button 2 & 3
to select the speed
to be adjusted followed by
Button 4
to select
7. Use
Button 2 & 3
to increase or
decrease as desired, followed by
Button 4
to save
8. Adjust the other speeds as
necessary or use
Button 1
to exit
Vehicle Speed
FWD 25
km/h
REV 8
Mm/h
FWD 13
km/h
REV 6
Km/h
FWD 8
Km/h
REV 5
Km/h
Transport
Mow
Creep
3.Use
Button 3
to scroll to PIN followed by
Button 4
to enter the Enter PIN page.
4.Enter the Owner PIN (Default 1001) to
enter the PIN Menu page.
5.Use
Button 3
to scroll to AdaptiCut™
followed by Button 4 to enter the AdaptiCut™
adjustment page.
6.Use
Button 2 & 3
to select either Speed
Decrease or Speed Increase as necessary,
followed by
Button 4
to select
7.Use
Button 1
to
4
to adjust the parameters
as desired.
Note:
that once the desired settings have
been adjusted the screen will auto-matically
save the settings and return to the previous
screen if no buttons are pressed for 3
seconds.
Speed Decrease
EDC Reduction [%]
5.0%
Decrease Time [Sec]
2.5 Sec
