Ransburg Vector AA90 79580, Service Manual

Page: 57 / 88

AH-07-01.8
Vector AA90 Applicators - Operation
5 2 5 2
5 2 5 2 5 2
Figure 38: Displaying "High Voltage On" Figure 38: Displaying "High Voltage On"
Figure 38: Displaying "High Voltage On" Figure 38: Displaying "High Voltage On"
Figure 38: Displaying "High Voltage On"
Time Time
Time Time
Time
To reset this register, press the reset button while
the hours are displayed.
To view the non-resettable register, press and
hold the preset 2 and reset buttons at the same
time.
Figure 39: Local/Remote Mode Button Figure 39: Local/Remote Mode Button
Figure 39: Local/Remote Mode Button Figure 39: Local/Remote Mode Button
Figure 39: Local/Remote Mode Button
>
If unit is in remote mode with no external
signal, the unit will not function. The unit
must be in local mode.
C A U T I O N C A U T I O N C A U T I O N C A U T I O N C A U T I O N
!!!!!
Measuring "High V Measuring "High V
Measuring "High V Measuring "High V Measuring "High Voltage On"
oltage On"
oltage On" oltage On" oltage On"
T T
T T
Time ime
ime ime
ime
The 9050 Power Supply records the amount of
time the high voltage is triggered on up to 99,999
hours. This value is displayed on the kV and
μ A
displays of the unit. There are two registers that
retain this information, one that may be reset, the
other that is permanently retained in memory. The
number of hours the unit's high voltage has been
on may be displayed by depressing at the same
time the preset 1 and reset buttons. The display
will show hours of use for 3 seconds. This is the
resettable register.
Local/Remote Mode Button Local/Remote Mode Button Local/Remote Mode Button Local/Remote Mode Button Local/Remote Mode Button
The 9050 Power Supply product line is designed
currently for applicators only. The mode should be
set to local for all Vector applicator applications.