AH-94-04.5
REA-90 and 90L Spray Guns - Maintenance
4 1
4 1
4 1
4 1
4 1
HOOK / TRANSFORMER
HOOK / TRANSFORMER
HOOK / TRANSFORMER
HOOK / TRANSFORMER
HOOK / TRANSFORMER
ON/OFF SWITCH
ON/OFF SWITCH
ON/OFF SWITCH
ON/OFF SWITCH
ON/OFF SWITCH
REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT
Removal
Removal
Removal
Removal
Removal
1.
With the hook transformer removed from
the handle, locate a small set screw just
under the on/off switch.
2.
With a small screw driver, unscrew the
set screw from the hook transformer un-
til the on/off switch can be pushed out.
Cleaning and Inspection
Cleaning and Inspection
Cleaning and Inspection
Cleaning and Inspection
Cleaning and Inspection
There is no reason to clean the on/off switch.
The switch is not repairable and must be re-
placed.
Reinstall
Reinstall
Reinstall
Reinstall
Reinstall
1.
Apply a light coating of dielectric grease
to the on/off switch.
2.
With the hook transformer setting with
the set screw facing upward and the
LED lens facing toward you, slide the
on/off switch into the hook transformer
so that the slot in the switch is on the left
side of the hook transformer and in line
with the set screw.
3.
Hold the on/off switch and screw the set
screw into the hook transformer until it
just contacts the switch body.
4.
Check the action of the switch by sliding
it back and forth in the hook transformer.
The switch should slide back and forth
with light resistance.
a.) If the on/off switch is hard to move,
loosen the set screw.
b.) If it moves when the hook
transformer is tilted from side to side,
tighten the set screw.
5.
Retest the hook transformer prior to
reinstalling into the handle. (Refer to
"Hook/Transformer Assembly - Testing
and Repair".)