10. Turn on voltage and trigger applicator. Green light
should be on.
(Horns Horizontal)
11. Adjust fluid pressure and air pressure as required
to achieve finish.
12. Adjust air cap position as required.
6. Adjust air pressure.
7. Position air cap to achieve pattern direction.
8. Actuate applicator (with voltage off) to spray
test pattern.
9. As a guide, the tables below show a pressure
at the wall to give 2.7 bar (40 psig) dynamic
at the handle of the applicator with different
hose lengths.
(
)
+
(
)
-
(Horns Vertical)
13. Adjust fan pattern as required.
14. Adjust fluid flow.
NOTE
It is recommended fluid flow be controlled
by the supply regulator. This adjustment should
only be used for fine adjustments.
AH-17-04-R0.0 (11/2017)
22 / 59
www.carlisleft.com
OPERATION
