09/11/2018
RANS S-21 OUTBOUND
TEXT MANUAL
114
8.
Fabricate aluminum bushings as shown in parts pages.
NOTE:
The 1/4" Bushing inserted through the Sliding Block should be
wider than the Block to allow it to swivel.
9.
Rotate the small cable keepers to the bottom of the pulleys and tighten the bolt to
prevent rotation. Insert cotter pins after rudder cables are installed.
10.
Lubricate the sliding block and 35" Push-Pull Tube with white Corrosion X to
allow easy movement. If necessary, the powder coat on the push-pull tube may
be smoothed in the contact area with a Scotch-Brite Pad.
11.
Check push-pull tube assembly for smooth operation.
