Rankam GR2297801-MM-00, Assembly & Operating Instructions

Page: 8 / 51

8 of 51 20181220-Ver.1.0
WARNING
FOR FILLING THE LP GAS CYLINDER
l
Allow only qualified LP gas dealers to properly fill or repair your LP cylinder.
l
DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a
dangerous condition. Over-filled tanks can build up pressure and cause the relief valve to
expel propane gas vapors. The vapor is combustible and if it comes in contact with a spark
source or flame an explosion causing severe burns, bodily harm, or death could occur.
l
Always use a safety cap when the grill is not connected to a cylinder.
l
If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a
Type 1 valve and an over-fill prevention device (OPD).
INSTALLING GAS CYLINDER
1. Check that the cylinder valve is closed by turning the knob in clockwise.
2. Place the cylinder into cylinder holder. Place cylinder such that the valve opening faces the
left side burner in such a way that the hose is not kinked/damaged.
3. Attach or detach the regulator to the LP gas cylinder only when the cylinder is placed on the
cylinder hole.