background image

                                                                             

  3 of 32 

                                                                 

20161206-Ver.1

 

 

 

WARNING 

 

 

This outdoor cooking gas appliance shall be used only outdoors and shall not be used in a 

building, garage or any other enclosed area.   

 

This  outdoor  cooking  gas  appliance  is  not  intended  to  be  installed  in  or  on  boats.  This 

appliance is not intended to be installed in or on recreational vehicles. 

 

Use  your  grill  OUTDOORS  in  a  well 
ventilated space away from dwellings 
or other buildings to prevent dangers 
associated  with  gas  accumulation 
and  toxic  vapors.  The  grill  should  be 
situated at least 60 inches (152.4 cm) 
from buildings. Not adhering to these 
clearances 

will 

prevent 

proper 

ventilation and may increase the risk 
of  a  fire  and/or  property  damage, 
which  could  also  result  in  personal 
injury. 

 

Maintain  a  minimum  clearance  of  60 
inches  (152.4  cm)  between  all  sides 
of  grill,  deck  railings,  walls  or  other 
combustible  material.  DO  NOT  use 
grill under any overhead combustible 
construction.   

 

DO NOT

 obstruct the flow of combustion/ventilation air.     

 

 

 

 

DO NOT

 leave the grill unattended while in use.   

 

DO NOT

 use while under the influence of drugs or alcohol.   

 

Keep the fuel supply hose away from heated surfaces. 

 

DO NOT

 put the grill in storage or move it after use. Allow the grill to be cool to the touch 

before  moving/storing.  Failure  to  do  so  could  result  in  a  fire  causing  property  damage, 
personal injury or death. 

 

The appliance is for household use only. 

DO NOT

 use this grill for other than its intended 

purpose. 

 

Never use natural gas in a unit designed for liquid propane gas. 

 

Never use charcoal or wood briquettes in a gas grill. Flavoring chips must be contained in 
a metal smoking box to contain ash and prevent fires. 

 

A Leak Test must be conducted prior to each use. 

 

Keep a fire extinguisher on hand acceptable for use with gas products. Refer to your local 
authority to determine proper size and type. 

 

Grill is hot when in use. To avoid burns: 

 

DO NOT

 attempt to move the grill. 

 

Lock the wheels so the unit does not accidentally move.   

 

Wear protective gloves or oven mitts. 

 

DO NOT

 touch any hot grill surfaces.   

 

DO NOT

 wear loose clothing or allow hair to come in contact with grill. 

 

Never close the side burner lid during operation. 

 

 

 

Maintain a minimum clearance of   

60 inches from combustible material. 

Summary of Contents for GR2234801-MM-00

































Reviews: