25 of 32
20161206-Ver.1
4. Turn the gas back on and recheck.
5. Should gas continue to leak from any of the fittings, turn off the gas supply and contact
customer service department at (888) 837-1380, 8 a.m. - 5 p.m., Pacific Standard Time, Monday
- Friday.
LIGHTING INSTRUCTIONS
BEFORE LIGHTING
WARNING
Inspect the gas supply hose prior to turning the gas
ON
.
If there is evidence of cuts, wear, or abrasion, the hose must be replaced prior to use.
Do not use the grill if the odor of gas is present.
Only the pressure regulator and hose assembly supplied with the unit should be used.
Perform the “
LEAK TEST
” according to the instructions before operating the grill
ALWAYS
keep your face and body away from the burner while lighting.
LIGHTING THE MAIN BURNER OF THE GRILL
1. Read instructions before lighting;
2. Open lid before lighting burner.
3. Make sure all control knobs are in the "
OFF
" position.
4. Turn ON gas valve from source or tank.
5. Push and turn any main burner control knob to
"HI"
and immediately press and hold the
electronic ignition button.
6. If ignition does NOT occur in 5 seconds, turn the burner control knob off, wait 5 minutes to
allow gas to dissipate. Repeat the lighting procedure.
7. Repeat above steps to light each burner individually.
