18
Some advice on calibration:
●
Do not change the distance from the center of the plate to the scanner when turning the plate. The
exception are only snapshots in positions 10 and 11.
●
Do not rotate the plate at a very high angle. Ensure that all marks on the plate are visible from both
cameras, when you turn the table.
●
Be careful with calibration plates! It is not permitted to contaminate or perform any mechanical
damage to the surface with the marks. After the use store the plates in designated case.
●
Before the calibration procedure ensure that cameras and cables are secure in the designated
position.
●
After calibration the calibration plate should be put inside the carrying case in order to avoid the
damage or contamination!