Ranger boats Angler, Owner'S/Operator'S Manual

Page: 62 / 80

60
Electrical Systems
Aerator System
Pressing the livewell key will activate two aerator pumps; pressing this button again will turn off the aeration
pumps. Pressing the livewell timer button will automatically turn on the aeration pumps and the timer in the “L”
setting. The timer can be adjusted in three increments - “L, M, and H”. The “L” setting is one minute on then two
minutes off. “M” is five minutes on and one minute off. “H” is 15 minutes on and two minutes off.
Fuel Level
The switch labeled with an image of a fuel pump on the console keypad controls which tank’s fuel will be
displayed by the fuel gauge. When the switch is pressed it will toggle between tank 1 and tank 2. Tank 1 will be on the
starboard side and 2 will be on the port side. On models with only 1 fuel tank, the number 2 position will cause the gauge
to read empty.
Bilge System
The switch labeled with an image of the water leaving the sump of the boat controls the bilge pumps in the boat.
Pressing the button once to turn on the manual bilge pump, press a second time to turn on the manual and auto
bilge pump. Pressing the button a third time will turn both pumps off.
Interior Lights
Pressing the button with the light bulb activates the interior lights on the boat. Pressing this key one time will
activate the lights; pressing the key a second time will turn off the lights. If the lights are left on, they will automatically
turn off after five minutes.
Interior Lights
Pressing the button with the light bulb activates the interior lights on the boat. Pressing this key one time will
activate the lights; pressing the key a second time will turn off the lights. If the lights are left on, they will automatically
turn off after five minutes.
Dimming the Instrument Lights and Keypad Lights
If the boat is equipped with the standard gauges it is possible to dim the gauge lights and key pad lights for night
driving. If the boat is not equipped with standard gauges the touch pad lights can be dimed. To do so press and
hold in on the light dimming button and the gauge lights along with the touch pad lights will dim down. The gauge
lights will dim down to an off state. The touch pad lights will dim down 90%. Once the level of brightness is obtain
release the dimming button. The switching system will leave the lights at this brightness until the dimming switch
is turned off. The indicator light around the dimming button will lite showing that dimming is active. If you choose
to make the lights bright again press and hold in on the dimming button until the brightness desired is obtained.
Accessories
There are five accessory functions labeled “ACC, A1, A2, and A3”. The accessories buttons will drive any
device up to 5 amps. Pressing the button once will turn the accessory on pressing a second time will turn the
accessory off.
Horn
The button with the image of a trumpet is the horn button. Pressing and holding this button will sound the horn; releasing
this button will turn the horn off.
Trim
On the bow keypad, the switch with the up arrow controls the trim-up and the switch with the down arrow
controls the trim down. Pressing and holding the button will allow the trim to function. Releasing the button will