Ranger boats Angler, Owner'S/Operator'S Manual

Page: 58 / 80

56
Electrical Systems
Navigation Lights
The switch labeled “Nav./Anchor” on the bow and console keypads controls the operation of the navigation
lights. On the first key press, the bow navigation and stern anchor lights will turn on. On the second press the bow
lights will turn off and the anchor light will remain on. On the third key press the anchor light will turn off.
Aerator System
Pressing the live well key will activate two aeration pumps. Pressing this button again will turn off the aeration
pumps. Pressing the live well timer button will automatically turn on the aeration pumps and the timer in the “L”
setting. The timer can be adjusted in two increments, “L and H”. The “L” setting is 1 minute on and 2 minutes off
and “H” is 15 minutes on and 2 minutes off.
Bilge System
The switch labeled with an image of the water leaving the sump of the boat controls the bilge pumps in the boat.
Pressing the button once turns on the manual bilge pump, press a second time to turn on the manual and auto bilge
pump. Pressing the button a third time will turn both pumps off.
Interior Lights
Pressing the button with the light bulb activates the interior lights on the boat. Pressing this key 1 time will
activate the lights. Pressing the key a second time will turn off the lights. If the lights are left on they will automatically
turn off after five minutes.
Dimming the Instrument Lights and Key pad Lights
If the boat is equipped with the standard gauges it is possible to dim the gauge lights and key pad lights for
night driving. If the boat is not equipped with standard gauges the touch pad lights can be dimmed. To do so press
and hold in on the light dimming button and the gauge lights along with the touch pad lights will dim down. The
gauge lights will dim down to an off state. The touch pad lights will dim down 90%. Once the level of brightness is
obtained, release the dimming button. The switching system will leave the lights at this brightness until the dimming
switch is turned off. The indicator light around the dimming button will light showing that dimming is active. If you
choose to make the lights bright again press and hold in on the dimming button until the brightness desired is
obtained.
Accessories
There are five accessory functions labeled “ACC, A1, A2, and A3”. The accessories buttons will drive any
device up to 5 amps. Pressing the button once will turn the accessory on. Pressing a second time will turn the
accessory off.
Horn
The button with the image of a trumpet is the horn button. Pressing and holding this button will sound the horn;
releasing this button will turn the horn off.
O2
This button controls the oxygenator in the live well, if your boat is equipped with this option. Press this button
to turn the oxygenator on, and pressing it a second time will turn this item off.