48
Electrical Systems
Aerator System
Pressing the “L” or “1” button will activate the rear well’s aeration pumps, pressing this button again will turn
off the aeration pumps. Pressing the “B” or “2” button will activate the bait well aeration pump; pressing this button
again will turn off the bait well aeration pump. At the bow pressing the aerator button once will turn on the rear
well, pressing a second time will turn on the rear well and the bait well, pressing a third time will turn the pumps
off. Pressing the aerator timer button will turn on the timer in the “L” setting. The timer can be adjusted in two
increments “L and H”. The “L” setting is 1 minute on then 2 minutes off and “H” is 15 minutes on and 2 minutes off.
Bilge System
The switch labeled with an image of the water leaving the sump of the boat controls the bilge pumps in the boat.
Pressing the button once turns on the manual bilge pump, press a second time to turn on the manual and auto bilge
pump. Pressing the button a third time will turn both pumps off.
Interior Lights
Pressing the button with the light bulb activates the interior lights on the boat. Pressing this key 1 time will
activate the lights; pressing the key a second time will turn off the lights. If the lights are left on, they will automatically
turn off after five minutes.
Dimming the Instrument Lights and Key Pad Lights
If the boat is equipped with the standard gauges it is possible to dim the gauge lights and key pad lights for
night driving. If the boat is not equipped with standard gauges the touch pad lights can be dimmed. To do so press
and hold in on the light dimming button and the gauge lights along with the touch pad lights will dim down. The
gauge lights will dim down to an off state. The touch pad lights will dim down 90%. Once the level of brightness is
obtained, release the dimming button. The switching system will leave the lights at this brightness until the dimming
switch is turned off. The indicator light around the dimming button will light showing that dimming is active. If you
choose to make the lights bright again press and hold in on the dimming button until the brightness desired is
obtained.
Accessories
There are five accessory functions labeled “ACC, A1, A2, and A3”. The accessories buttons will drive any
device up to 5 amps. Pressing the button once will turn the accessory on, and pressing a second time will turn the
accessory off.
Horn
The button with the image of a trumpet is the horn button. Pressing and holding this button will sound the horn;
releasing this button will turn the horn off.
O2
This button controls the oxygenator in the live well, if your boat is equipped with this option. Press this button
to turn the oxygenator on, pressing it a second time will turn this item off.
Vent Fan
This button operates a blower motor used to force air from the outside into port rod, center, and the starboard
storage compartments. Press this button once to turn the blower on, press it again and it will turn the blower off.
Summary of Contents for Angler
