Rangemaster Professional+ 100 FX, User'S Manual & Installation Instructions

Page: 27 / 48

23
The timed oven is not coming on when automatic cooking
Has the oven knob been left in the OFF position by
mistake?
Oven temperature getting hotter as the cooker gets older
If turning the temperature down using the oven control
knob has not worked, or has only worked for a short
time, then you may need a new thermostat. This should
be fitted by a service person.
Oven lights are not working
The bulb has probably burnt out. You can buy a
replacement bulb (which is not covered under the
warranty) from a good electrical shop. Ask for a 40 W –
230 V halogen lamp (G9) (Fig. 7.3) .
Before removing the existing bulb, turn off the power
supply and make sure that the oven and bulb have
cooled. Open the oven door and remove the oven
shelves.
Remove the bulb cover by turning it a quarter turn,
counter-clockwise. It may be very stiff
(Fig. 7.4)
.
Pull the existing bulb to remove it. When handling the
replacement bulb, avoid touching the glass with your
fingers, as oils from your hands can cause premature
failure. Push, click in the replacement bulb.
Replace the bulb cover by turning it a quarter turn,
clockwise. Turn on the circuit breaker and check that the
bulb now lights.
Fig. 7.1 Fig. 7.2
Fig. 7.3
Fig. 7.4