background image

 

 

 

 

 

EN 

 

9

 

MAINTENANCE

 

Grease filters 

CLEANING METAL SELF- SUPPORTING GREASE FILTERS 

•  The filters must be cleaned every 2 months of operation, or 

more frequently for particularly heavy usage, and can be 
washed in a dishwasher. 

•  Remove the filters one at a time by pushing them towards the 

back of the group and pulling down at the same time.  

•  Wash the filters, taking care not to bend them. Allow them to 

dry before refitting. 

•  When refitting the filters, make sure that the handle is visible 

on the outside.

 

 

Activated charcoal filter (Recirculation version) 

These filters are not washable and cannot be regenerated, and 
must be replaced approximately every 4 months of operation, or 
more frequently with heavy usage.  

REPLACING THE ACTIVATED CHARCOAL FILTER 

•  Remove the metal grease filters 
•  Remove the saturated activated charcoal filter as shown (A). 
•  Fit the new filters (B). 
•  Replace the metal grease filters.

 

 

A

B

Lighting 

LIGHT REPLACEMENT 

40 W incandescent light. 
•  Remove the metal terminals fixing the light cover. 
•  Slide the light cover to the right until the left hand is free. 

Lower it slightly and slide it to the left to free it completely. 

•  Unscrew the bulbs and replace them with new ones having the 

same characteristics. 

•  Replace the lighting support in reverse order. 

 

Summary of Contents for LEIHDC70BB













Reviews: