Rangemaster GEO Intense GEO4TIDCM, Installation Manual, Page: 7 / 10

Parts and Contents Parts and Contents Parts and Contents Parts and Contents
Key Key Key Key Description Description Description Description Qty Qty Qty Qty
A1 Mixer tap 1
A2 Base plinth 1
A3 Base plinth seal 1
A4 Sink or worktop (max. 50mm) 0
A5 White triangular plate (for use
with steel sinks only) 1
A6 Lower gasket 1
A7 Metal horseshoe 1
A8 Fixing stud 1
A9 Fixing nut 1
B1 Cold filtered (from tap to boiler)
flexible hose (M8 x 3/8”F),
includes captive seal 1
B2 3/8” M x ¼”F brass adaptor 1
B3 ¼” NPT M x ¼” pushfit 1
B4 ¼” outside diameter plastic pipe 1**
C1 Cold filtered (from filter to tap)
blue banded flexible hose (M8 x
3/8”F), includes captive seal 1
C2 3/8” M x ¼”F brass adaptor 1
C3 ¼” NPT M x ¼” pushfit 1
C4 ¼” outside diameter plastic pipe 1**
C5 Filter bracket 1
C6 Filter bracket screw 1
C7 Filter cartridge 1
C8 ¼” outside diameter plastic pipe 1**
C9 ¾” BSPF x ¼” pushfit adaptor 1
D1 Steaming hot water (from boiler
to tap) “110°” red labelled
flexible hose. M8 x 3/8”F 1
D2 3/8” fibre seal 1
E1 Domestic hot in (from mains
feed) red banded flexible hose
M10 x ½”BSPM (15mm) 1
F1 Domestic cold in (from mains
feed) blue banded flexible hose
M10 x ½”BSPM (15mm) 1
F2 Non return valve (factory fitted
into flexible hose F1) 1
F3 15mm olive 0
F4 15mm nut 0
F5 15mm pipe 0
G1 15mm isolation valve 0
G2 15mm olive 0
G3 15mm nut 0
G4 15mm pipe 0
G5 15mm nut 2
G6 15mm olive 2
G7 ½” x ½” x 3/4” isolating tee valve 1
**
Part supplied with boiler pack, cut to form
required lengths to and from filter and boiler,
for the boiler parts list and connections please
refer to the instructions supplied with the
boiler for more detail.