Rangemaster GEO Intense GEO4TIDCM Installation Manual Download Page 4

Care instructions for your kitchen tap mixer 

 

To maintain the appearance of this tap, ensure that it is regularly cleaned only using a clean, soft damp cloth. A 
solution of warm water and a mild liquid detergent may be used where necessary, and then the fitting rinsed 
thoroughly and wiped dry. Any other cleaning action will invalidate your warranty.  

Abrasive cleaners, scouring cleaners and acidic cleaners must not be used 

must not be used 

must not be used 

must not be used under any circumstances. Avoid 

contact with all solvents (including chlorinated solvents, ketones or acetones as these may result in surface 
deterioration or etching). Also avoid contact with any harsh household chemicals such as oven cleaners, drain 
cleaners, rust removers, paint strippers and toilet bowl cleaners, bar keepers friend or Brasso. 

Where the tap has a removable aerator on the spout exit it can be removed and cleaned periodically to 

maintain optimum flow performance and remove any limescale, when reattaching please ensure to reconnect 

ensure to reconnect 

ensure to reconnect 

ensure to reconnect 

the center stem of the aerator to the center spout flexible tube fully

the center stem of the aerator to the center spout flexible tube fully

the center stem of the aerator to the center spout flexible tube fully

the center stem of the aerator to the center spout flexible tube fully. 

 

5 Year 

5 Year 

5 Year 

5 Year Tap 

Tap 

Tap 

Tap Warranty Terms and Conditions

Warranty Terms and Conditions

Warranty Terms and Conditions

Warranty Terms and Conditions    

 

In the unlikely event that you should experience any defect in the materials or workmanship of your new 
Rangemaster 4 in 1 hot mixer tap within FIVE years of purchase, the purchaser’s sole remedy shall be the 
replacement (at the manufacturer’s discretion) of all or any part of the product that is defective. All working 
parts and valves are guaranteed for a period of FIVE years from purchase. Decorative surface finishes and O-
rings are guaranteed for FIVE years from the date of purchase provided that our advice concerning care has 
been observed and no scouring agents have been used.  

This is provided that the mixer has been used for normal domestic purposes in the UK or Eire and that the care, 
installation and maintenance instructions have been observed. The warranty extends to the original purchaser 
only. You should retain a copy of your dated invoice as proof of purchase to validate any claims under this 
guarantee. 

 

Marks, scuffs and scratches caused by improper installation or accidental damage are not covered by this 
guarantee. Neither are shade variations or any damage or defect caused by incorrect installation or abuse of 
the fitting.  

As we are continuously improving and developing our range of products, finishes & colours, in the event of a 
valid claim, we may not be able to provide an identical replacement for the defective product throughout the 
guarantee period. Where an identical product is no longer available, we will supply the nearest equivalent from 
our then current product range. In assessing your claim, we must be given the opportunity to inspect the 
product as installed prior to removal. Any product returns must be packaged as received and complete. 

 

No other warranties, express or implied, are made, including merchantability or fitness for a particular purpose. 
Under no circumstances shall the manufacturer be liable for any loss or damage arising from the purchase, use 
or inability to use this product, or for any special, indirect, incidental or consequential damages. No liability is 
accepted for consequential damage to other household fixtures, fittings or furnishings arising from this claim, 
even if attached to the product. No installer, dealer, agent or employee of Aga Rangemaster Limited has the 
authority to modify the obligations or limitations of this warranty. 

 
For boiler warranty terms and conditions please see the separate user guide supplied.

For boiler warranty terms and conditions please see the separate user guide supplied.

For boiler warranty terms and conditions please see the separate user guide supplied.

For boiler warranty terms and conditions please see the separate user guide supplied.    

Summary of Contents for GEO Intense GEO4TIDCM











Reviews: