Range Road RR5029, Owner'S Manual

Page: 30 / 38

Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Figure U: Scale and Scale Pointer
11. Align the cutting Blade with the top of the log, loosen the Scale Pointer Knob and adjust the Scale Pointer to
point at a starting mark on the Scale. Tighten the Scale Pointer Knob.
12. Release both T-Handles (18). Turn the Height Adjustment Handle (131) and lower the cutting height until the
Scale Pointer points to the desired thickness. Tighten both T-Handles (18).
13. The cut direction must be as shown below. If the log is cut from the other direction, the saw blade will push the
log away from the supports and may cause the log to become unstable.
14. WARNING! All operators must stay clear of the front and back of the blade whenever the engine is running.
15. Start and operate the engine according to the provided engine manual.
16. Adjust the Throttle to bring the Blade up to speed. The Locking Ring can be turned to lock the throttle in place.
Figure V: Direction of Cut
End of Cut
Start of Cut