Range Road RR5029, Owner'S Manual

Page: 23 / 38

Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
For 36A Models Only:
37A) This model is equipped with a winch, instead of the crank system found on other mills.
The lift cables will route the same as the smaller mills for the most part, but you can easily see the 36
” model has
the cables joined near the winch, so that only one cable actually goes down to the winch.
The winch can be mounted at any height on the right rear post, simply drill holes where you want the unit mounted
and install with the provided bolts. There are pre-drilled holes that you can use as well, if the height is suitable.