Manual-19
SetMicActive(Mic, Value)
Sets a Mic’s Active Setting
SetMicSigMode(Mic, Value)
Sets a Mic’s Signal Mode Setting
SetMicGateMode(Mic, Value)
Sets a Mic’s Gate Mode Setting
SetMicGateDepth(Mic, Value)
Sets a Mic’s Gate Depth
SetMicAutoThreshold(Mic, Value)
Sets a Mic’s Auto Threshold Setting
SetMicThresholdLevel(Mic, Value)
Sets a Mic’s Threshold Level
SetMicGateRelease(Mic,Value)
Sets a Mic’s Gate Release Setting
Events:
OnOpstats
Opstats updated from ECB 6
OnParams
Parameters updated from ECB 6
Initialization:
Set_Controller
(
Via10RW232X
)
Must be called for each Via10 RW 232 ActiveX control as the argument to
begin communication. This must be called for each RW 232 device in the
system – where
Via10RW232X
is replaced with the name of each RW
232 ActiveX control inserted into FrontPage. See example 1 above.
RPE 228d ActiveX control
Control Name: Via10RPE228X
Description: Allows control of any RPE 228 or RPE 228d connected to a Via 10. See “RW 232 Device Control Language”,
available in PDF form in the Library at
www.rane.com
for parameter value details.
Design Time Parameters:
Addr
RW 232 Address (1-250)
OpstatFreq
Milliseconds between Opstat updates
Runtime Parameters:
Memory
Reflects the current memory selected in the RPE 228
Ch1InGain
Channel 2’s Input Gain
Ch1OutGain
Channel 2’s Output Gain
Ch1Mute
Channel 2’s Mute
Ch1LowCut
Channel 2’s Low Cut Setting
Ch1HighCut0
Channel 2’s High Cut Setting
Ch1ByPass
Channel 2’s Bypass
Ch2InGain
Channel 2’s Input Gain
Ch2OutGain
Channel 2’s Output Gain
Ch2Mute
Channel 2’s Mute
Ch2LowCut
Channel 2’s Low Cut Setting
Ch2HighCut0
Channel 2’s High Cut Setting
Ch2ByPass
Channel 2’s Bypass
Events:
OnOpstats
Opstats updated from RPE 228
OnParams
Parameters updated from RPE 228
Initialization:
Set_Controller
(
Via10RW232X
)
Must be called for each Via10 RW 232 ActiveX control as the argument to begin communication.
This must be called for each RW 232 device in the system – where Via10RW232X is replaced with
the name of each RW 232 ActiveX control inserted into FrontPage. See example 1 above.
