Manual-20
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www.rane.com
103417
RPM 26v ActiveX control
Control Name: Via10RPM26vX
Description: Allows control of an RPM 26v connected to a Via 10
Design Time Parameters:
Addr
RW 232 Address (1-250)
OpstatFreq
Milliseconds between Opstat updates
Runtime Parameters:
Memory
Reflects the current memory selected in the RPM 26v
DSPProgram
Currently Active DSP Program
MeterInA
Last meter reading for Input A
MeterInB
Last meter reading for Input B
MeterOut1
Last meter reading for Output 1
MeterOut2
Last meter reading for Output 2
MeterOut3
Last meter reading for Output 3
MeterOut4
Last meter reading for Output 4
MeterOut5
Last meter reading for Output 5
MeterOut6
Last meter reading for Output 6
Limiters
Current Limiter Flags
CompressorA
Compression Level for Input A
CompressorB
Compression Level for Input B
MasterLevel
Master Level
InATrim
Input A’s Trim
InAMute
Input A’s Mute
InBTrim
Input B’s Trim
InBMute
Input B’s Mute
Out1Src
Output 1’s Input Signal Source
Out2Src
Output 2’s Input Signal Source
Out3Src
Output 3’s Input Signal Source
Out4Src
Output 4’s Input Signal Source
Out5Src
Output 5’s Input Signal Source
Out6Src
Output 6’s Input Signal Source
Out1Trim
Output 1’s Trim
Out2Trim
Output 2’s Trim
Out3Trim
Output 3’s Trim
Out4Trim
Output 4’s Trim
Out5Trim
Output 5’s Trim
Out6Trim
Output 6’s Trim
Out1Mute
Output 1’s Mute
Out2Mute
Output 2’s Mute
Out3Mute
Output 3’s Mute
Out4Mute
Output 4’s Mute
Out5Mute
Output 5’s Mute
Out6Mute
Output 6’s Mute
Events:
OnOpstats
Opstats updated from RPM 26v
OnParams
Parameters updated from RPM 26v
Initialization:
Set_Controller
(
Via10RW232X
)
Must be called for each Via10 RW 232 ActiveX control as the argument to begin communication.
This must be called for each RW 232 device in the system – where Via10RW232X is replaced with
the name of each RW 232 ActiveX control inserted into FrontPage. See example 1 above.
