6
Connection Diagram, Example 3:
Features
Top Panel
1.
High Torque Direct Drive Platter:
A 5.0
kgf-cm motor turns this aluminum platter
with speed position dots.
Note:
The platter itself should not be held
in position for sustained periods while
powered to rotate.
2.
Control Disc with Slipmat:
This full-size
12" (30.5 cm) disc controls the audio
playhead in your DJ software. Place the
included slipmat under the
Control Disc
(or a different slipmat can be used, if
preferred). To get a looser feel with more
spinback on your
Control Disc
, place 1-4
of the included spacers over the spindle,
underneath the slipmat.
Note:
The
Control Disc
can be user
replaced by attaching the
Quick Release
Adapter
to your own modified disc. The
replacement disc must have three 6 mm
holes, and the included disc should be
used as a reference.
3.
Quick Release Adapter:
This secures the
Control Disc
to the
platter
. It comes attached
to the top of the
Control
Disc
. To remove the
Control Disc
or slipmat from the platter,
hold in the button on the side of the
Quick Release Adapter
while lifting the disc off the
spindle. After placing the disc back on the spindle, pinch the top of the spindle while
slowly rotating the disc until you hear it click. It locks when the groove in the spindle lines
up directly opposite to the button on the side of the
Quick Release Adapter
.
4.
Motor On/Off
&
Strobe Light:
Turn this dial at the top of the strobe light to turn the platter
motor
on
or
off
. The unit will remain powered on, allowing for wind down effects.
The
strobe light
illuminates the edge of the platter, which indicates whether or not the
phase of the platter’s rotation is constant. As the platter rotates, look at the dots on its
edge under the light’s strobing. If the phase is constant, the dots will appear to be still. If
the rotation is out of phase, the dots will appear to move or “drift.”
Power
Rane Twelve
MKII Rear
Panel
Rane Twelve
MKII Bottom
Panel Recess
Supported Serato
DJ Pro Device
(e.g. Rane SL4)
Computer
1
2
3
4
5
6
7
8
16
13
14
9
10
11
12
15
