background image

26

TTM 56S

PERFORMANCE  MIXER

Warranty Procedure - Valid in USA only

NOTICE! You must complete and return the warranty card or register your 

product online to extend the Warranty from 2 years to 3 years!

TO VALIDATE YOUR EXTENDED WARRANTY: Use the postcard that came in the box with your unit, or go to 

www.rane.com

 

and click on 

New Product Registration

. Fill out the warranty completely, being sure to include the model and serial number of the 

unit since this is how warranties are tracked. If your Rane product was purchased in the U.S.A., mail the completed card or register 

online with to Rane Corporation within 10 days from the date of purchase. 

If you purchased the product outside the U.S.A. you 

must file your warranty registration with the Rane Distributor in that country.

 It is advised that you keep your bill of sale as 

proof of purchase, should any difficulties arise concerning the registration of the warranty card. 

NOTICE:

 IT IS NOT NECES-

SARY TO REGISTER IN ORDER TO RECEIVE RANE CORPORATION’S STANDARD TWO YEAR LIMITED WAR-

RANTY.

WARRANTY REGISTRATION is made and tracked by MODEL AND SERIAL NUMBERS ONLY, not by the purchaser’s or 

owner’s name. Therefore any warranty correspondence or inquires MUST include the model and serial number of the product in 

question. Be sure to fill in the model and serial number in the space provided below and keep this in a safe place for future reference.

WARRANTY SERVICE MUST BE PERFORMED ONLY BY AN AUTHORIZED RANE SERVICE FACILITY LOCATED 

IN THE COUNTRY WHERE THE UNIT WAS PURCHASED, OR (if product was purchased in the U.S.) AT THE RANE 

FACTORY IN THE U.S.. If the product is being sent to Rane for repair, please call the factory for a Return Authorization number. 

We recommend advance notice be given to the repair facility to avoid possible needless shipment in case the problem can be solved 

over the phone. UNAUTHORIZED SERVICE PERFORMED ON ANY RANE PRODUCT WILL VOID ITS EXISTING FAC-

TORY WARRANTY.

FACTORY SERVICE: If you wish your Rane product to be serviced at the factory, it must be shipped FULLY INSURED, IN THE 

ORIGINAL PACKING OR EQUIVALENT. This warranty will NOT cover repairs on products damaged through improper pack-

aging. If possible, avoid sending products through the mail. Be sure to include in the package:

1. Complete return street shipping address (P.O. Box numbers are NOT acceptable).

2. A detailed description of any problems experienced, including the make and model numbers of any other system equipment.

3. Remote power supply, if applicable.

Repaired products purchased in the U.S. will be returned  prepaid freight via the same method they were sent to Rane. Products pur-

chased in the U.S., but sent to the factory from outside the U.S. MUST include return freight funds, and the sender is fully respon-

sible for all customs procedures, duties, tariffs and deposits.

In order to qualify for Rane’s one year extended warranty (for a total of 3 

years parts and labor), the warranty must be completely filled out and sent to 

us immediately. Valid in USA only.

We recommend you write your serial number here in your owners 

manual and on your sales receipt for your records.

SERIAL NUMBER:______________________________________PURCHASE DATE:_____________________________

Summary of Contents for TTM 56S





























Reviews: