9. Master Volume - (270-degree Rotary Pot) [analog]:
Controls the gain of the master outputs.
10. Booth Volume - (270-degree Rotary Pot) [analog]:
Controls the gain of the booth outputs.
11. Channel PFL/Cue– (Tact switch w/Red LED) [MIDI] – Activates PFL for selected channel.
Radio Style, Press and hold one PFL channel and pressing the other will turn both on.
12. UI Browser – plastic (360-degree Encoder and Push Switch) [MIDI]:
A standard detented encoder with push switch is used to navigate through the software.
The push switch will typically be used for selection and forward navigation through the UI.
The encoder will typically be used for
scrolling through item lists. Holding Shift +: Loads the current song in focus in the Prepare Window in the
software.
13. Back - (Tact switch with Red LED) [MIDI] :
Pressing this button will take the library focus back a step in the software.
Holding Shift +: Adds the current song in focus to the Prepare Window in the software.
LED State: always Dim
14. FX buttons 1-6 (Tact Switch with Red LED) (Qty: 6) [MIDI]:
These radio style buttons are used to select a software effect.
LED State: On Bright/Toggle Active flashing/Off Dim.
15. FX On/Off (3 Tact switch “paddle” spring loaded):
This is used to activate both hardware and software FX. Pushing up on the paddle will latch (lock) the FX in
the
on position. Pushing down on the paddle will turn the FX on momentarily. When the paddle is in the middle
position the FX are in the off state.
16. Tap (Tact switch white LED) [MIDI]:
This button is used to manually tap in the tempo in both software effects banks. Shift+ will reset the BPM
in the effects banks to whatever is embedded in the song.
17. FX Depth (270 rotary pot) [MIDI]: Adjusts the Level/Depth of all FX
18. Parameter Encoder (360 Rotary Encoder with Push):This will control hardware FX parameters.
19. SYNC (Tact Switch w/ blue LED) (plastic) [MIDI]:
This control is used to force the track to align with the other deck’s tempo and phase.
It is up to the software to either hard align or gently nudge it into place, depending on the Smart or
Simple Sync chosen from the settings.
The LED for this control will light when active. Shift + SYNC will deactivate Sync. LED’s On/Off.
20. Strip Search (Touch Strip with 8 Red LEDs) [MIDI] :
This constant force linear pot is used to allow the user to jump to any point within a track by touching
Anywhere along the strip. The LEDs will show time elapsed in relation to current song playing.
Summary of Contents for NK49
