Rane DA216S, User Manual

Page: 27 / 28

27
Appendix ( English )
Technical Specifications
Parameter Specification Limit Units Conditions/Comments
Mic Input Impedance 1.82k 1%
Ω
Balanced 909 + 909
Line Input Impedance
17.9k 1% Ω Balanced 8.97k + 8.97k
Mic Gain Control +40 & +60 + 2 dB 2-position switch
Mic Pad
20 + 2 dB 2-position switch
Line Gain Range 0 & +20 + 2 dB 2-position switch
Overall Mic Gain +56 & +76 + 4 dB All controls maximum
Overall Line Gain +16 & +36 + 4 dB All controls maximum
Max Mic Input Level -20 typ dBu Gain at 40 dB
Max Line Input Level
+21 typ dBu Gain at 0 dB
Overload LED 3 dB below clip typ Clip defined as 1% THD+N
Phantom Power +15 +0.5 VDC Phantom Power switch active
Output Impedance 200 1%
Ω
Balanced 100+100
Output Drive Level
+24 typ dBu 600 Ω load
Output Cable Length 1500 max feet Belden 8451 or equivalent
Mic Equivalent Input Noise
-128 typ dBu Rs=150, gain=60 dB
Line Signal-to-Noise Ratio 100 min dBV Gain=0 dB, re +4 dBu, 22 kHz BW
THD+Noise (Line Input) 0.005 typ % Gain=0 dB, +4 dBu@1 kHz, 80 kHz BW
Frequency Response, Line 15–50 kHz +0, -3 dB 0 dB Gain, 0 dBu Output
Frequency Response, Mic 15–50 kHz +0, -3 dB 40 dB Gain, 0 dBu Output
Frequency Response, Line
30–50 kHz +0, -3 dB 60 dB Gain, 0 dBu Output
Crosstalk 80 typ dB +4 dBu Output, 1 kHz
Power Supply Requirement 100 to 240 10% VAC 50/60 Hz, 7W
Connectors (2) Euroblock zone inputs (+, –, ground)
(16) Euroblock zone outputs (+, –, ground)
(1) IEC power inlet
Dimensions
(width x depth x height)
19.0” x 5.3” x 1.75”
48.3 x 13.3 x 4.4 cm
Weight 4.0 lbs.
1.9 kg
Specifications are subject to change without notice.
Trademarks & Licenses
Rane is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
All other product names, company names, trademarks, or trade names are those of their respective owners.