R&S ZVA Series Getting Started Download

Page: 29 / 106

Preparing the Analyzer for Use

R&S

ZVA

Getting Started 1145.1090.62 ─ 13

For detailed information about Remote Desktop refer to the Windows

Help.

1.9 Firmware Update

Upgrade versions of the analyzer firmware are supplied as single setup files *.msi. To
perform a firmware update,

1. Copy the setup file to any storage medium accessible from the analyzer. This may

be the internal hard disk, an external storage medium (USB memory stick, CD-
ROM with external drive) or a network connection (LAN, GPIB bus).

2. Double-click the setup file (or use the front panel keys to select and start the setup

file; see

chapter 2.3.2.1, "Using Front Panel Keys"

on page 39) and follow the

instructions of the setup wizard.

Setup files can be stored and installed again. The default drive letter of the internal
hard disk is "C". External storage devices are automatically mapped to the next free
drive letters "D", "E" etc.

Factory calibration

A firmware update does not affect the factory calibration.

External accessories

Calibration units and extension Units must be disconnected during a firmware update.

Firmware Update

Summary of Contents for ZVA Series











































































































Search results

Summary of Contents for ZVA Series

Reviews:

Related manuals for ZVA Series

Brands by name

Popular brands

R&S ZVA Series, Getting Started

Search results

Summary of Contents for ZVA Series

Reviews:

Related manuals for ZVA Series

Brands by name

Popular brands