manualshive.com logo in svg

R&S VTE, Getting Started

Share
Download
R&S VTE Getting Started Download Page 38

Operating the R&S

 

VTE in a LAN

R&S

®

VTE

38

Getting Started 2116.1270.02 ─ 07

●

If your network does not support DHCP or if you choose to disable dynamic
TCP/IP configuration, you must assign valid address information before con-
necting the R&S

 

VTE to the LAN.

Errors may affect the entire network.

Efficient virus protection is a prerequisite for secure operation in the network.
Never connect the R&S

 

VTE to a network without proper protection against a

virus infection, as doing so may cause damage to the R&S

 

VTE firmware.

To connect the R&S

 

VTE to a network

1. Fulfill all prerequisites mentioned above.

2. Make sure that the R&S

 

VTE is switched off. This is the only way to ensure

that the network connection is reliably detected and any disruptions during the
operation of the R&S

 

VTE are avoided.

3. Connect the R&S

 

VTE to the network using a CAT-5e cable or better.

4. Switch on the R&S

 

VTE.

To disconnect the R&S

 

VTE from a network

1. Make sure that the R&S

 

VTE is switched off.

2. Disconnect the R&S

 

VTE from the network.

6.2

 

Connecting the R&S

 

VTE to a Computer

How to set up a LAN connection between an R&S

 

VTE and a single computer

without integration into a larger network depends on the operating system instal-
led on the computer.

6.2.1

 

Windows

 

7 Operating System

If Windows

 

7 is installed on the computer, you can set up a LAN connection really

fast.

1. Activate DHCP on both the computer and the R&S

 

VTE.

Connecting the R&S

 

VTE to a Computer

Summary of Contents for VTE





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands