R&S VTE, Getting Started

Page: 17 / 52

Preparing for Use
R&S
®
VTE
17 Getting Started 2116.1270.02 ─ 07
4 Preparing for Use
This chapter describes the basic steps to be taken when setting up the product
for the first time.
4.1 Lifting and Carrying
See "Lifting and carrying the product" on page 8.
Use the handles to carry the R&S VTE.
4.2 Unpacking and Checking
The R&S VTE is shipped together with its mandatory accessories in a cardboard
box.
1. Check the shipping container and cushioning material for damage.
2. Unpack the product carefully.
a) Open the cardboard box.
b) Remove the accessories packed into the box.
c) Take the R&S
VTE out of the packaging.
d) Remove the shock protectors attached to the R&S VTE.
3. Retain the original packing material. Use it when transporting or shipping the
product later.
4. Using the delivery documents, check the equipment for completeness.
5. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde
& Schwarz.
For information on warranty conditions for the R&S VTE, refer to the terms of the
delivery documents.
Unpacking and Checking