R&S TSMA6B-BP, Manual

Page: 28 / 33

Maintenance, storage and disposal
R&S
®
TSMA6B-BP
28 Manual 4900.9099.02 ─ 02
To charge the batteries in-bay
1. Insert the batterie(s) in the correct way (charge indicator facing up).
2. Take care of the nut in the battery and the pin inside the battery bay (see
Chapter 8.2.2, "Hot swapping battery exchange" , on page 29).
Charging starts automatically when DC power is connected. For checking the
charging state, see
Chapter 6.4.2, "Rear panel LEDs in standalone operation" ,
on page 23.
To charge the batteries with an external charger
1. Press the battery bay lid(s) and open it up.
2. Remove the batteries.
3. Connect the batteries with an external charger.
NOTE: For allowed charger types, see "External charger for batteries"
on page 26.
4. To check, if the batteries are fully charged, refer to Chapter 6.4.1, "Checking
the charge status of the individual battery" , on page 22.
Handling batteries