R&S SMCVB-K163 User Manual Download

Page: 10 / 92

Welcome to the DVB-T Option

R&S

SMCVB-K163

User Manual 1179.0997.02 ─ 02

Welcome to the DVB-T Option

The R&S

SMCVB-K163 is a firmware application that adds functionality to generate

signals in accordance with the DVB-T digital standard.

The R&S

SMCVB-K163 option features:

●

DVB-T signal generation

This user manual contains a description of the functionality that the application pro-
vides, including remote control operation.

All functions not discussed in this manual are the same as in the base unit and are
described in the R&S

SMCV100B user manual. The latest version is available at:

www.rohde-schwarz.com/manual/SMCV100B

Installation

You can find detailed installation instructions in the delivery of the option or in the
R&S

SMCV100B service manual.

2.1

Accessing the DVB-T Dialog

To open the dialog with DVB-T settings

► In the block diagram of the R&S

SMCV100B, select "Baseband > DVB-T".

A dialog box opens that displays the provided general settings.

The signal generation is not started immediately. To start signal generation with the
default settings, select "State > On".

Accessing the DVB-T Dialog

Summary of Contents for SMCVB-K163





























































































Search results

Summary of Contents for SMCVB-K163

Reviews:

Related manuals for SMCVB-K163

Brands by name

Popular brands

R&S SMCVB-K163, User Manual

Search results

Summary of Contents for SMCVB-K163

Reviews:

Related manuals for SMCVB-K163

Brands by name

Popular brands