R&S SMCVB-K163, User Manual

Page: 83 / 92

Remote-Control Commands
R&S
®
SMCVB-K163
83 User Manual 1179.0997.02 ─ 02
SYSTem:COMMunicate:BCIP1:NETWork:PROTocol?
// Response: "UDP"
:SYSTem:COMMunicate:BCIP<hw>:NETWork:COMMon:HOSTname
................................... 83
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress
....................................................83
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:MODE
......................................... 83
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:SUBNet:MASK
............................. 84
:SYSTem:COMMunicate:BCIP<hw>:NETWork:MACaddress
................................................ 84
:SYSTem:COMMunicate:BCIP<hw>:NETWork:PROTocol
.................................................... 84
:SYSTem:COMMunicate:BCIP<hw>:NETWork:RESTart
.......................................................84
:SYSTem:COMMunicate:BCIP<hw>:NETWork:STATus
........................................................85
:SYSTem:COMMunicate:BCIP<hw>:NETWork:COMMon:HOSTname <Hostname>
Sets an individual hostname for the vector signal generator.
Note: We recommend that you do not change the hostname to avoid problems with the
network connection. If you change the hostname, be sure to use a unique name.
Parameters:
<Hostname> string
Example: See Example "Retrieving information on local network-related
settings" on page 82.
Manual operation: See "Hostname" on page 44
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress
Sets the IP address.
Parameters:
<IpAddress> string
Range:
0.0.0.0 to 255.255.255.255
*RST: 0.0.0.0
Example: See Example "Retrieving information on local network-related
settings" on page 82.
Manual operation: See "IP Address" on page 44
:SYSTem:COMMunicate:BCIP<hw>:NETWork:IPADdress:MODE <IPMode>
Selects manual or automatic setting of the IP address.
Parameters:
<IPMode> AUTO | STATic
*RST:
AUTO
Example: See Example "Retrieving information on local network-related
settings" on page 82.
Manual operation: See "Address Mode" on page 44
BCIP Subsystem