R&S SMCVB-K163, User Manual

Page: 17 / 92

DVB-T Configuration and Settings
R&S
®
SMCVB-K163
17 User Manual 1179.0997.02 ─ 02
Settings:
Source ..........................................................................................................................17
Input ............................................................................................................................. 18
Input Format .................................................................................................................18
IP TS Channel ...............................................................................................................18
Stuffing .......................................................................................................................... 18
Test Signal ....................................................................................................................19
Source
Sets the modulation source for the input signal.
Figure 4-1: Block diagram with test signal insertion
"External" Uses a transport stream, that is input at the "TS IN"/"IP Data" inter-
face.
For more information about connecting to the interfaces, see also:
●
"TS IN" interface: Section "Configuring the Global Connectors" in
the R&S
SMCV100B user manual.
●
"IP Data" interface: Chapter 4.8, "Local IP Data Network Set-
tings" , on page 43.
"TS Player" Uses an internal transport stream with TS packet data played from a
file. The player requires no option.
Playing encrypted files with extension
_c
requires a stream library
option R&S SMCVB-KSx.
See also:
●
Chapter 4.7, "TS Player" , on page 34
●
Supported TS player file types
"Test Signal" Uses an internal test signal as specified in Chapter 4.2.3, "Test Signal
Settings" , on page 22.
Remote command:
Non-hierarchical coding
[:SOURce<hw>]:BB:DVBT:SOURce[:HIGH]
on page 58
Hierarchical coding
[:SOURce<hw>]:BB:DVBT:SOURce[:HIGH]
on page 58
[:SOURce<hw>]:BB:DVBT:SOURce:LOW
on page 58
Input Signal Settings