File and Data Management
R&S
®
SMA100B
194
User Manual 1178.3834.02 ─ 03
9.2.2 How to Identify Parameters Which Are Not in a Preset State
To recognize the current state of the settings related to their default values at the first
glance, enable a function that visually identifies parameters in states different than pre-
set.
To activate this display:
1. Open the context-sensitive menu (touch and hold the screen anywhere in the GUI
of the R&S
SMA100B).
2. Select "Mark all parameters changed from preset".
If enabled, the corresponding settings are marked.
Example:
Figure 9-2: Labeled parameters show that the value deviates from its default
Frequency
= changed (default = 1 GHz)
Offset
= changed (default = 0 kHz)
Multiplier
= unchanged
Variation active = changed (default = enabled)
Variation step = unchanged
9.2.3 How to Recall User Settings Automatically after Preset
You can define the settings that are restored when you preset the instrument.
1. Configure the settings as required. Save them as described in
to Save and Recall Instrument Settings"
2. Save the settings as a file with the predefined filename
UserPreset.savrcltxt
.
Save this file in the directory
/var/user/
.
Restoring the (Default) Instrument Configuration
