R&S SMA100B, User Manual

Page: 452 / 581

Remote Control Commands
R&S
®
SMA100B
437 User Manual 1178.3834.02 ─ 03
[:SOURce<hw>]:POWer:LIMit[:AMPLitude] <Amplitude>
Limits the maximum RF output level in CW and sweep mode.
It does not influence the "Level" display or the response to the query
[:
SOURce<hw>]:POWer[:LEVel][:IMMediate][:AMPLitude]
.
Parameters:
<Amplitude> float
Range:
depends on the installed options
Increment: 0.01
*RST:
n.a. (factory preset: 30)
Example:
SOURce1:POWer:LIMit:AMPLitude 10
Manual operation: See " Limit " on page 70
[:SOURce<hw>]:POWer:LMODe <LevMode>
Sets the RF level mode.
Parameters:
<LevMode> NORMal | LOWNoise | LOWDistortion
NORMal
Supplies the RF signal with the standard power level of the
instrument.
LOWNoise
Supplies a very low noise sinewave signal.
LOWDistortion
Supplies a very pure sinewave signal.
*RST:
NORMal
Example: SOURce1:POWer:LMODe LOWD
Sets low distortion mode. The instrument reduces distortions of
the RF signal to a minimum.
Manual operation: See " Mode " on page 71
[:SOURce<hw>]:POWer:MANual <Manual>
Sets the level for the subsequent sweep step if SWE:POW:MODE MAN .
Use a separate command for each sweep step.
SOURce Subsystem